3D Printing Cost Calculator: How to Estimate Filament Use and Cost

Main Cost Calculator core

Use the filament weight reported by your slicer at your actual infill setting.

Advanced / informational
Filament Weight from length

Calculate weight from length, diameter & density

Weight: 0.00 g
Spool Length from weight

Calculate length from weight, diameter & density

Length: 0.00 m

Filament used: 0.00 g (0.00 m)

Spool remaining: 0.00 m (0.00 g)

Infill material (approx.): 0.00 g

Print time: 0.00 h

Resin used: 0.00 ml

Support material: 0.00 g

Nozzle flow: 0.00 mm³/s

Material cost: 0.00 $

auto-saved

How to Estimate Filament Use and Cost

A 3D printing cost calculator can help you work out how much filament a print may use and how much that material will cost. It can also help you estimate how much filament is left on a spool.

This calculator has three parts. The main calculator works out filament use, spool length, and material cost. The other two parts help you change filament length into weight, or weight into length.

You can enter your own numbers to get results. Let's look at how each part works.

The Main 3D Printing Cost Calculator

The Main Cost Calculator is the first part of the tool. It uses the filament weight shown by your 3D printer slicer. A slicer is the program that prepares a 3D model for printing. It often shows how much filament a print is expected to use.

Enter the filament weight in grams. Then enter the filament diameter, density, spool length, infill percentage, print time, and price per kilogram.

The diameter and density help the calculator change filament weight into length. This is useful because different types of filament do not all have the same weight for the same length.

For example, a 1.75 mm PLA filament with a density of 1.24 g/cm³ weighs about 2.98 grams per metre. A filament with a larger diameter or a different density will give a different result.

The calculator uses these details to estimate how many metres of filament your print will use. It then takes that length away from the spool length to show how much filament may be left.

You will see the remaining amount in both metres and grams. This can help you keep track of your filament before starting another print.

Understanding the Other Results

The calculator also shows an estimate for the infill material. Infill is the material used inside a 3D printed object. It helps give the object support and shape.

The infill result is only an approximate share of the total filament weight. It is shown for information and is not added again to the material cost.

The material cost is worked out from the filament weight and the price per kilogram. For example, if a print uses 100 grams of filament and the filament costs $25 per kilogram, the material cost is $2.50.

This figure covers the filament only. It does not include electricity, printer repairs, labour, or other costs.

The calculator also has fields for print time, resin use, support material, and nozzle flow. These are extra details that you can enter and view in the results panel. The tool displays the values you enter; it does not work out new estimates for them.

Filament Weight: Calculate Weight from Length

The second part of the tool is the Filament Weight Calculator.

This section helps you find the weight of a piece of filament when you know its length, diameter, and density.

Enter the length in metres. Then enter the filament diameter and density. Click Calculate Weight to see the result in grams.

For example, you can enter 100 metres of 1.75 mm filament with a density of 1.24 g/cm³. The result will be about 298.27 grams.

This can be useful when you know how much filament you have by length but want to estimate its weight.

Spool Length: Calculate Length from Weight

The third part works in the opposite way.

The Spool Length Calculator helps you find the length of filament when you know its weight, diameter, and density.

Enter the weight in grams, along with the diameter and density. Click Calculate Length to see the estimated length in metres.

For example, 100 grams of 1.75 mm filament with a density of 1.24 g/cm³ is about 33.53 metres long.

Both small calculators use the same basic measurements. One changes length into weight, while the other changes weight into length.

How to Use the Results: A Simple Example

Suppose your slicer shows that a print will use 100 grams of filament. You have a 330-metre spool of 1.75 mm PLA filament with a density of 1.24 g/cm³. The filament costs $25 per kilogram, and the print uses 20% infill.

Enter these numbers into the main calculator.

The results will show:

  • Filament used: 100 grams, or about 33.56 metres.
  • Spool remaining: About 296.44 metres, or 883 grams.
  • Infill material: About 20 grams.
  • Material cost: $2.50.

The calculator also displays the print time, resin use, support material, and nozzle flow values that you enter.

These results give you a simple way to check your material use and cost. The actual amount used may differ from the slicer's estimate, so use the figures as a guide.

Other Helpful Features

The calculator has a few features that make it easier to use.

  • Dark mode: Changes the calculator to a darker look.
  • Reset: Returns the main calculator to its starting values.
  • Clear saved: Clears the saved main calculator values and returns them to the starting values.
  • Copy: Copies the results so you can paste them into another document or note.
  • Print: Lets you print the calculator.
  • Formulas: Opens a list of the formulas used by the calculator.

The main calculator also saves your input values in your browser. This means your settings can still be there when you return using the same browser and device. Your saved values are not shared between all your devices.

Frequently Asked Questions

Is this calculator useful for planning a 3D print?

Yes. It can help you estimate filament length, the amount left on a spool, and the cost of the filament used. The results depend on the numbers you enter.

Why do I need to enter filament diameter and density?

Filament diameter and density affect how much a length of filament weighs. The calculator uses these details to change grams into metres, or metres into grams.

Does the calculator include electricity costs?

No. The material cost result covers filament only. You would need to work out electricity and any other costs separately.

Does the calculator work with different filament sizes?

Yes. You can enter the diameter and density of the filament you are using. The result will change based on those values.

Does the calculator give an exact print cost?

No. It gives an estimate of the filament cost based on the weight reported by your slicer and the price per kilogram. It does not include every cost involved in running a 3D printer.

Final Thoughts

This 3D Printing Cost Calculator brings three useful tools together in one place. You can estimate filament use and material cost, find the weight of filament from its length, and find filament length from its weight.

Enter the details for your filament, check the results, and use them to help plan your next 3D printing project.